PERIPHERAL DRIVER, 5 DRIVER

The TLD2252-2EP is designed to control LEDs with a current up to 120 mA. In typical automotive applications the device is capable of driving 3 red LEDs per chain total 6 LEDs with a current up to 100 mA and even above, if not limited by the overall system thermal properties. Practically, the output current is controlled by an external resistor or reference source, independently from load and supply voltage changes.

The ICL8810 is a single-stage flyback LED controller for constant voltage output, tailored for LED lighting applications . With its benchmarking performance for power factor correction and total harmonic distortion at full-load and low-load conditions, ICL8810 enables window drivers and platform designs. Furthermore, the IC combines optimum efficiency and low EMI without compromising light quality.

The ICL8800 is a single-stage flyback LED controller for constant voltage output, tailored for LED lighting applications . With its benchmarking performance in power factor correction and total harmonic distortion at full-load and low-load conditions, ICL8800 enables window drivers and platform designs. Furthermore, the IC combines optimum efficiency and low EMI without compromising light quality.

The XDP digital power XDPL8219 is a high-performance secondary-side regulated flyback controller with high power factor and constant voltage output

Infineons BCR431U is a linear LED driver IC in a small SOT23-6 package regulating the LED current in standalone operation without any external power transistor

The BCR402R is a cost efficient LED driver to drive low power LEDs.

The ICL8820 is a single-stage flyback LED controller for constant voltage output, tailored for LED lighting applications . With its benchmarking performance for power factor correction and total harmonic distortion at full-load and low-load conditions, ICL8820 enables window drivers and platform designs. Furthermore, the IC combines optimum efficiency and low EMI without compromising light quality.

BCR601 is a linear LED controller IC regulating the LED current with an external driver transistor

The ILD2111 is a high-performance configurable buck controller, designed as a constant current source with average output current regulation. The IC supports output current setting at the end user with a simple resistor Led-set like. Important parameters like target current and protection features can be configured by a dedicated single pin UART interface. The ILD2111 buck controller is dimmable by an external PWM signal.